Filter
Top Products
E6581528
B-6
2
[Standard connection diagram - sink logic]
The figure below shows an example of typical wiring in the main circuit VFAS1-6400KPC to 6630KPC inverter.
*3
*6
*2
*2
*4 *4 *4
Control power supply
backup (Option) *5
(a)
(a)
From (a)
(a)
(a)
b-contact of
overload relay
Surge
suppressor
Transformer
down to 200V
Voltage signal:-10~+10V
Voltage signal:0~10V
or current signal:4 (0)~20mA
External potentiometer
(or voltage signal between RR/S4 and CCA:0~10V)
Ammeter or voltmeter
Ammeter
Frequency
meter
(a)
Forward run signal
Reverse run signal
Reset
Preset speed 1
Preset speed 2
Preset speed 3
Common
Default settings
Main circuit power source
TRS
*2
*1
PFL
Transformer for
Fan power Supply
2%
Rectifi
cation
circuit
NOISE
Filter
Main
circuit
76
86
96
+/
Motor
NOISE
Filter
Rectifi
cation
circuit
Fan
:
:
(
4
4'5
5
5
5
%%
41
51
61
/%%$
470
/%
Control
circuit
4U
O#
59
59
59
59
.1
+06
44
22
176
22.%
176
01
%%
294
4;
4;
176
(/ #/
%%#
4:
445
8+++
Ქ
Ყ
Ქ
Ყ
(.#
(.$
57
(.%
470
4.
5.
6.
4.
5.
6.
2#
X0
X2
6
%2
10
/%%$
1((
/%
*7 *7
690V class :
Three-phase 500~690V-50/60Hz
500/575V class :
315(500HP)~500kW(700HP)
400~630kW
*1: AC reactor (PFL): Mandatory for VFAS1-6110KPC and above.
*2: Transformer for fan supply (TRS) ⇒Refer to section 1.4.4.
*3: ⇒ Refer to Section 2.3.2 for switch functions.
*4: The functions assigned to terminals OUT1, VI/II and RR/S4 can be switched by changing parameter settings.
⇒ For details refer to Section 2.3.2.
*5: To supply control power from an external power supply for backing up the control power supplied from the inverter, an
optional control power backup device (CPS002Z) is required. In such a case, the backup device is used at the same time
with the internal power supply of the inverter.
To back up control power, set the parameter (Control power supply backup option failure monitoring) properly.
⇒ For more information, refer to 6.33.24.
*6: For PWR connection conforming to safety standards, refer to Section 9.3.
*7: If you use a braking unit (optional) and external braking resister (optional) in combination.
*8: TRS(Transformer for fan power supply) can not be used this system for VFAS1-6110KPC and above.