Filter
Top Products
Instrument Preset State
The table below shows the state of the instrument after a PRESET from
the Sto/Rcl menu or SYSTem:PRESet command from the remote interface.
Measurement Configuration
Function
Range
Resolution
Advanced Settings
Totalizer Reset Mode
Totalizer Edge Detect
Scanning Operations
Scan List
Reading Memory
Min, Max, and Average
Scan Interval Source
Scan Interval
Scan Count
Scan Reading Format
Monitor in Progress
Mx+B Scaling
Gain Factor (“M”)
Scale Factor (“B”)
Scale Label
Alarm Limits
Alarm Queue
Alarm State
HI and LO Alarm Limits
Alarm Output Configuration
Alarm Output State
Alarm Output Slope
Module Hardware
34901A, 34902A, 34908A
34903A, 34904A
34905A, 34906A
34907A
System-Related Operations
Display State
Error Queue
Stored States
Preset State
No Change
No Change
No Change
No Change
Count Not Reset When Read
No Change
Preset State
No Change
All Readings are Cleared
All Statistical Data is Cleared
No Change
No Change
No Change
No Change
Stopped
Preset State
No Change
No Change
No Change
Preset State
No Change
No Change
No Change
No Change
Output Lines are Cleared
No Change
Preset State
Reset: All Channels Open
Reset: All Channels Open
Reset: Channels s11 and s21 Selected
Reset: Both DIO Ports = Input, Count = 0,
Both DACs = 0 Vdc
Preset State
On
Errors Not Cleared
No Change
4
Chapter 4 Features and Functions
Instrument Preset State
161