Filter
Top Products
© Copyright Agilent Technologies, Inc.
1997-2003
No part of this manual may be repro-
duced in any form or by any means
(including electronic storage and
retrieval or translation into a foreign
language) without prior agreement
and written consent from Agilent
Technologies as governed by the United
States and international copyright laws.
Manual Part Number
34970-90003, March 2003
(order as 34970-90101 manual set)
Edition
Edition 3, March 2003
Edition 2, October 1997
Edition 1, July 1997
Printed in Malaysia
Agilent Technologies, Inc.
815 14th Street S.W.
Loveland, Colorado 80537 U.S.A.
Assistance
Product maintenance agreements and
other customer assistance agreements
are available for Agilent Technologies
products. For assistance, contact your
nearest Agilent Technologies Sales and
Service Office. Further information is
available on the Agilent web site at
www.agilent.com/find/assist.
Trademark Information
Microsoft
®
and Windows
®
are U.S.
registered trademarks of Microsoft
Corporation. All other brand and
product names are trademarks or
registered trademarks of their
respective companies.
Certification
Agilent Technologies certifies that this
product met its published specifications
at the time of shipment from the factory.
Agilent Technologies further certifies
that its calibration measurements are
traceable to the United States National
Institute of Standards and Technology,
to the extent allowed by that organiza-
tion’s calibration facility, and to the
calibration facilities of other Interna-
tional Standards Organization members.
Warranty
The material contained in this
document is provided “as is,” and is
subject to being changed, without
notice, in future editions. Further,
to the maximum extent permitted
by applicable law, Agilent disclaims
all warranties, either express or
implied with regard to this manual
and any information contained
herein, including but not limited to
the implied warranties of mer-
chantability and fitness for a
particular purpose. Agilent shall
not be liable for errors or for
incidental or consequential
damages in connection with the
furnishing, use, or performance of
this document or any information
contained herein. Should Agilent
and the user have a separate
written agreement with warranty
terms covering the material in this
document that conflict with these
terms, the warranty terms in the
separate agreement will control.
Technologies Licenses
The hardware and/or software described
in this document are furnished under
a license and may be used or copied
only in accordance with the terms of
such license.
Restricted Rights Legend
If software is for use in the performance
of a U.S. Government prime contract or
subcontract, Software is delivered and
licensed as “Commercial computer soft-
ware” as defined in DFAR 252.227-7014
(June 1995), or as a “commercial item”
as defined in FAR 2.101(a) or as
“Restricted computer software” as
defined in FAR 52.227-19 (June 1987)
or any equivalent agency regulation or
contract clause. Use, duplication or
disclosure of Software is subject to
Agilent Technologies’ standard commer-
cial license terms, and non-DOD
Departments and Agencies of the U.S.
Government will receive no greater
than Restricted Rights as defined in
FAR 52.227-19(c)(1-2) (June 1987).
U.S. Government users will receive no
greater than Limited Rights as defined
in FAR 52.227-14 (June 1987) or DFAR
252.227-7015 (b)(2) (November 1995),
as applicable in any technical data.
Safety Notices
Do not defeat power cord safety ground
feature. Plug in to a grounded outlet.
Do not use product in any manner not
specified by the manufacturer.
Do not install substitute parts or
perform any unauthorized modification
to the product. Return the product to an
Agilent Technologies Sales and Service
Office for service and repair to ensure
that safety features are maintained.
WARNING
A WARNING notice denotes a hazard.
It calls attention to an operating proce-
dure, practice, or the like that, if not
correctly performed or adhered to,
could result in personal injury or death.
Do not proceed beyond a WARNING
notice until the indicated conditions are
fully understood and met.
CAUTION
A CAUTION notice denotes a hazard.
It calls attention to an operating proce-
dure, practice, or the like that, if not
correctly performed or adhered to,
could result in damage to the product or
loss of important data. Do not proceed
beyond a CAUTION notice until the
indicated conditions are fully understood
and met.
Symbols
WARNING
Main power disconnect: Unplug
product from wall outlet and remove
power cord before servicing. Only quali-
fied, service-trained personnel should
remove the cover from the instrument
or connect external wiring to a module.
For continued protection against fire,
replace the line fuse only with a fuse
of the specified type and rating.
Earth ground
Chassis ground
Risk of electric shock
warranty.fm Page 0 Monday, March 31, 2003 1:40 PM