Filter
Top Products
Dell™ Printer Configuration Web Tool
101
IPv6 Obtain address from DHCP Allows you to enable or disable
the automatic setting of the IP
address via DHCP.
Use Manual Address To set the IP address manually.
Manual Address Manually sets the IP address. To
specify an IPv6 address, enter the
address followed by a slash (/)
and then "64." For details,
consult your system
administrator.
Auto Statefull Address Displays the statefull address.
Stateless Address 1-3 Displays the stateless addresses.
Link Local Address Displays the link local address.
Manual Gateway Address Manually sets the gateway
address.
Auto Configure Gateway
Address
Displays the gateway address.
DNS DNS Domain Name Specifies the domain name of the domain name server. Up to 255
alphanumeric characters, periods, and hyphens can be used. If you
need to specify more than one domain name, separate them using a
comma or semicolon.
IPv4 Get DNS Server Address from
DHCP
Specifies whether to get the
DNS server address
automatically from the DHCP
server.
Manual DNS Server Address Sets the DNS server address.
IPv6 Get DNS Server Address from
DHCPv6-lite
Select the check box to get the
DNS server address
automatically from the
DHCPv6-lite server.
Manual DNS Server Address Sets the DNS server address.
LPD Connection Time-Out Sets the connection time-out period from 1 to 1000 seconds.
IP Filter (IPv4) Specifies the IP address and subnet mask to be permitted or denied
access to the printer.
Port9100 Port Number Sets the port number from 9000 to 9999.
Connection Time-Out Sets the connection time-out period between 1 and 1000 seconds.
IP Filter (IPv4) Specifies the IP address and subnet mask to be permitted or denied
access to the printer.
HTTP Port Number Sets the port number. This must be 80 or between 8000 and 9999.
Simultaneous Connections Displays the maximum number of connections received
simultaneously by the client.
Connection Time-Out Sets the connection time-out period from 1 to 255 seconds.