Filter
Top Products
38
Setting Up Your Printer
6
Setting Up Your Printer
Configuring Initial Settings on the Operator Panel
You need to set the language, country, time zone, date and time when you turn on printer for the first time.
NOTE:
When you turn on the printer for the first time, the setup wizard appears on the LCD panel. If you do not proceed with the
setup within 3 minutes, the status of the printer changes to
Ready to Copy
. If you want to run the setup wizard again,
select
Power On Wizard
from the LCD panel.
NOTE:
For more information on operator panel, see "Understanding the Printer Menus" on page 117.
1
Ensure that
Please Select Language
appears, and then select the language you want to use on the
operator panel from the drop-down list, and then press the
(Set)
button.
2
Press the
(Set)
button to start setting the country.
3
Ensure that
Please Select Country
appears. Select your country from the drop-down list, and then press
the
(Set)
button.
4
Ensure that
Please Select Time Zone
appears. Select the appropriate time zone from the following drop-
down list, and then press the
(Set)
button.
Geographic Region Time Zone
Africa (UTC) Accra, Bamako, Dakar, Nouakchott
(UTC) Casablanca
(UTC +01:00) Algiers, Douala, Libreville, Luanda
(UTC +01:00) Tunis
(UTC +01:00) Windhoek
(UTC +02:00) Cairo
(UTC +02:00) Harare, Johannesburg, Kinshasa, Tripoli
(UTC +03:00) Addis Ababa, Khartoum, Mogadishu, Nairobi