Filter
Top Products
Copying
193
Reduce/Enlarge
To reduce or enlarge the size of a copied image, from 25 percent to 400 percent when you copy original documents
from the document glass or ADF:
NOTE:
When you make a reduced copy, black lines may appear at the bottom of your copy.
NOTE:
This item is available only when
Multiple-Up
is set to
Off
or
Manual
.
1
Load the document(s) face up into the ADF with the top edge of the document(s) in first.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Making Copies From the ADF" on page 191 or "Making Copies From
the Document Glass" on page 189.
2
Press the
(Copy)
button.
3
Press the button until
Preferences
is highlighted, and then press the
(Set)
button.
4
Press the
button
until
Reduce/Enlarge
is highlighted, and then press the
(Set)
button.
5
Press the
button
to select the desired settings, and then press the
(Set)
button.
mm series
NOTE:
Values marked by an asterisk (
*
) are the factory default menu settings.
inch series
NOTE:
You can also use the numeric keypad to input the desired zoom ratio from 25% to 400%, or press the button to
enlarge the zoom ratio or press the button to reduce the zoom ratio in 1% intervals.
200%
A5->A4(141%)
A5->B5(122%)
100%*
B5->A5(81%)
A4->A5(70%)
50%
200%
Stmt->Lgl(154%)
Stmt->Ltr(129%)
100%
*
Lgl->Ltr (78%)
Ldgr->Ltr(64%)
50%