Filter
Top Products
Dell™ Printer Configuration Web Tool
93
Printer Maintenance
This tab contains the Paper Density, Adjust Transfer Roller, Adjust Fusing Unit, Auto Registration Adjustment,
Color Registration Adjustment, Clean Developer, Adjust Altitude, Reset Defaults, Non-Dell Toner, Clock
Settings, and Web Link Customization pages.
Paper Density
Purpose:
To specify the paper density.
Va l ues :
Adjust Transfer Roller
Purpose:
To specify the optimum voltage settings for printing for the transfer roller. To decrease the voltage, set negative
values. To increase the voltage, set positive values.
The default settings may not give the best output on all paper types. If you see mottles on the printed paper, try to
increase the voltage. If you see white spots on the printed paper, try to decrease the voltage.
NOTE:
The print quality changes depending on the values you select for this item.
Prefix Dial Specifies whether to set a prefix dial number.
Prefix Dial Number Sets a prefix dial number of up to five digits. This number prioritizes over any auto dial number. It
is useful for accessing the Private Automatic Branch Exchange (PABX).
Discard Size Sets whether to discard text or images at the bottom of a fax page when the entire page does not
fit onto the output paper. Selecting Auto Reduction automatically reduces the fax page to fit it
onto the output paper, and does not discard any images or text at the bottom of the page.
ECM Sets whether to enable the ECM. To use the ECM, the remote machines must also support the
ECM.
Modem Speed Specifies the fax modem speed when a fax transmission or reception error occurs.
Fax Activity Sets whether to automatically print a fax activity report after every 50 incoming and outgoing fax
communications.
Fax Transmit Sets whether to print a transmission report after every fax transmission or only when an error
occurs.
Fax Broadcast Sets whether to print a transmission report after every fax transmission to multiple destinations or
only when an error occurs.
Fax Protocol Sets whether to print a protocol monitor report after every fax transmission or only when an error
occurs.
Country Sets the country where the printer is used.
Plain Sets the paper density of plain paper.
Label Sets the paper density of labels.