Dell E525w All in One Printer User Manual


 
Dell™ Printer Configuration Web Tool
99
Va l ues :
Wireless Settings Wireless LAN Specifies whether to enable wireless connection.
SSID Specifies the name that identifies the wireless network using up to
32 alphanumeric characters.
Network Type Specifies the network type from either Ad-Hoc or Infrastructure.
MAC Address Displays the MAC address of the wireless network setting of the
printer.
Link Channel Displays the channel number of the wireless connection of the
printer.
Link Quality Displays the quality of the wireless network connection of the
printer.
Security Settings Encryption Select the security method from the list.
No Security
*
Specifies No Security to
configure the wireless setting
without specifying a security
method from WEP, WPA2-PSK
AES, and Mixed Mode PSK.
WEP 64 Bit ASCII (5 Bytes) Specifies the WEP 64 Bit ASCII
to use through the wireless
network.
WEP 128 Bit ASCII (13 Bytes) Specifies the WEP 128 Bit
ASCII to use through the
wireless network.
WEP 64 Bit Hex (10 Bytes) Specifies the WEP 64 Bit Hex to
use through the wireless
network.
WEP 128 Bit Hex (26 Bytes) Specifies the WEP 128 Bit Hex
to use through the wireless
network.
WPA2-PSK-AES
*1
Specifies the WPA2-PSK AES to
use through the wireless
network.
Mixed Mode PSK Specifies the Mixed Mode PSK
to use through the wireless
network.
WEP Key 1 Enter the WEP key when WEP is selected from Encryption.
Re-enter WEP Key 1 Enter the WEP key 1 again to confirm.
WEP Key 2 Enter the WEP key when WEP is selected from Encryption.
Re-enter WEP Key 2 Enter the WEP key 2 again to confirm.
WEP Key 3 Enter the WEP key when WEP is selected from Encryption.
Re-enter WEP Key 3 Enter the WEP key 3 again to confirm.
WEP Key 4 Enter the WEP key when WEP is selected from Encryption.
Re-enter WEP Key 4 Enter the WEP key 4 again to confirm.
Transmit Key Specifies the transmit key type from the list.
Pass Phrase Specifies the passphrase.
Re-enter Pass Phrase Enter the passphrase again to confirm.
*1
This item is available only when Infrastructure is selected for Network Type.