Filter
Top Products
Dell™ Printer Configuration Web Tool
85
Printer Settings
Use this menu to display the Printer Settings Report and to configure the printer settings.
The following tabbed pages are displayed at the top of the right frame.
Printer Settings Report
This tab contains the Menu Settings and Reports pages.
Menu Settings
Displays the current settings of the printer menus.
Reports
Purpose:
To print the settings and history information of your printer.
Va l ues :
Printer Settings
This tab contains the System Settings, USB Settings, PCL Settings, PostScript Settings, PDF Settings, Secure
Settings, Copy Defaults, Copy Color Balance, Copy Settings, Scan Defaults, USB Direct Print Defaults, Fax
Defaults, and Fax Settings pages.
System Settings
Purpose:
To configure the basic printer settings.
Va l ues :
System Settings Click Start to print the system settings page.
Panel Settings Click Start to print the panel settings page.
PCL Fonts List Click Start to print the PCL fonts list.
PS Fonts List Click Start to print the PS fonts list.
Job History Click Start to print the job history report.
Error History Click Start to print the error history report.
Protocol Monitor Click Start to print the protocol monitor report.
Address Book Click Start to print the address book report.
Color Test Page Click Start to print the color test page.
Fax Activity Click Start to print the fax activity report.
Stored Documents Click Start to print the stored documents list.
Power Saver Timer - Sleep
*1
Specifies the time taken by the printer before it enters the power saver timer mode 1 after it
finishes a job.
Power Saver Timer - Deep
Sleep
Specifies the time taken by the printer before it enters the power saver timer mode 2 after it goes
into the power saver timer mode 1.
Auto Reset Specifies the time taken by the printer before it automatically resets the settings for Copy, Scan, or
Fax on the operator panel to the defaults when no additional settings are made.
Panel Select Tone Sets the volume of the tone that is emitted when the operator panel input is correct, or disables
the tone.