Filter
Top Products
52
Installing Printer Drivers on Computers Running Windows
®
11
To change the printer name, enter the printer name in the
Printer name
text box, and then click
Next
.
Installation starts.
12
If you do not share your printer, select
Do not share this printer
. If you share your printer, select
Share this printer
so that others on your network can find and use it.
Click
Next
.
13
As the driver installation is completed, click
Print a test page
to verify installation. To use this printer as the default
printer, select the
Set as the default printer
check box.
14
Click
Finish
.
Network Connection Setup
Installing PCL, PS and Fax Printer Drivers
1
Insert the
Software and Documentation
disc into your computer to start
Dell Printer Easy Install
.
2
Click
Main Menu
.
3
Click
Connect
.
4
Select
Wireless or Ethernet Connection
, and then click
Next
.
5
Select the printer you want to install from the printer list, and then click
Next
. If the target printer is not displayed
on the list, click the (Refresh) button or click
add printer
to add a printer to the list manually. You may specify
the IP address and port name at this point.
If you have installed this printer on the server computer, select the
I am
setting up this printer on a server
check
box.
NOTE:
If you are running any of the following operating systems, a Windows Security Alert is displayed:
• Windows Vista
®
• Windows Vista
®
64-bit Edition
• Windows
®
7
• Windows
®
7 64-bit Edition
• Windows
®
8
• Windows
®
8 64-bit Edition
• Windows
®
8.1
• Windows
®
8.1 64-bit Edition
• Windows Server
®
2008
• Windows Server
®
2008 64-bit Edition
• Windows Server
®
2008 R2 64-bit Edition
• Windows Server
®
2012
• Windows Server
®
2012 R2
To continue installing the driver, click
Unblock
or
Allow access
(for Windows Server
®
2008 R2 and Windows
®
7).
6
Specify the printer settings as necessary, and then click
Next
.
7
Select the software and documentation you want to install, and then click
Install
.
You can specify folders in which to install the software and documentation. To change the folders, click
Change
Destination Folder
, and then specify a new location.
8
Click
Finish
to exit the wizard when the
Ready to Print!
screen appears.