Dell E525w All in One Printer User Manual


 
Troubleshooting
295
Ghosting
Action Yes No
1 Adjust the transfer bias.
a
Launch the
Tool Box
, and click
Registration Adjustment
on the
Printer Maintenance
tab.
b
Click
Chart Print
.
c
Click
Ghost Configuration Chart
.
The ghost configuration chart is printed.
d
Click
Adjust Transfer Roller
.
e
Select the
Transfer Roller Refresh Mode
check box, and then click
Apply New Settings
.
f
Click
Registration Adjustment
on the
Printer Maintenance
tab.
g
Click
Chart Print
.
h
Click
Ghost Configuration Chart
.
The ghost configuration chart is printed.
Is the problem recovered?
The task is complete. Go to action 2.
2
The print media surface may be uneven. Try changing the
Paper Type
setting in the printer driver. For example, change the plain paper to
thick.
a
On the
General
or
Paper/Output
tab in
Printing Preferences
of the
printer driver, change the
Paper Type
setting.
Is the problem recovered?
The task is complete. Go to action 3.
3
Adjust the fusing unit temperature.
a
Launch the
Tool Box
, and click
Adjust Fusing Unit
on the
Printer
Maintenance
tab.
b
Adjust the fixing temperature by turning up the value for your
printing media.
c
Click
Apply New Settings
.
Is the problem recovered?
The task is complete. Go to action 4.
4
If you use non-recommended print media, use the print media
recommended for the printer.
Is the problem recovered?
The task is complete. Contact Dell.