Filter
Top Products
Understanding the Printer Menus
125
Resolution
Purpose:
To specify the resolution level to be used for fax transmission.
Va lues:
NOTE:
Faxes scanned in the
Super Fine
mode transmit at the highest resolution supported by the receiving device.
Original Type
Purpose:
To select the default document type.
Va lues:
Lighter/Darker
Purpose:
To set the default copy density level.
Va lues:
Delayed Start
Purpose:
To set a specific time for the fax transmission to start. Once this setting is activated, your printer stores all of the
documents to be faxed into its memory and sends them at the specified time. After faxing is complete, the data in
the memory is cleared.
Va lues:
NOTE:
A maximum of 19 delayed fax jobs can be stored in this printer.
Standard* Suitable for documents with normal sized characters.
Fine Suitable for documents containing small characters or thin lines or documents printed using a dot-matrix
printer.
Super Fine Suitable for documents containing extremely fine detail. The
Super Fine
mode is enabled only if the
remote machine also supports the super fine resolution. See the notes below.
Ultra Fine Suitable for documents containing photographic images.
Text* Suitable for documents with text.
Photo Suitable for documents with photos.
Lighter2 Makes the fax lighter than the original. Works well with dark print.
Lighter1
Normal* Works well with standard typed or printed documents.
Darker1 Makes the fax darker than the original. Works well with light print or faint pencil markings.
Darker2
21:00*/PM9:00* Specifies the fax transmission start time when sending a fax at a specified time.
0:00 - 23:59 /
AM/PM1:00 - 12:59