Filter
Top Products
Understanding the Printer Menus
139
NOTE:
This item is displayed when the Ethernet cable is disconnected and
Wi-Fi
is set to
On
.
WPS Setup
Purpose:
To configure the wireless network using Wi-Fi Protected Setup™ (WPS).
Va lues:
NOTE:
WPS-PBC stands for Wi-Fi Protected Setup-Push Button Configuration.
NOTE:
WPS 2.0 compliant. WPS 2.0 works on access points with the following encryption types: Mixed Mode PSK, WPA-PSK
AES, WPA2-PSK AES, Open (No Security)
NOTE:
This item is available only when the Ethernet cable is disconnected and
Wi-Fi
is set to
On
.
Wi-Fi Direct Setup
Purpose:
To configure the Wi-Fi Direct
®
settings.
Va lues:
WEP WEP Key Entry Configures the wireless settings with the
WEP encryption. For 64-bit keys, enter
10 hexadecimal characters. For 128-bit
keys, enter 26 hexadecimal characters.
Transmit Key Specifies the transmit key from WEP
Key 1
*
, WEP Key 2, WEP Key 3, and
WEP Key 4.
Push Button
Configuration
PBC Start
*1
No
*
Disables the security method of WPS-PBC.
Yes Configures the wireless setting with the security method of
WPS-PBC.
PIN Code Start Configuration Configures the wireless setting using the PIN code assigned
automatically by the printer.
Print PIN Code Prints the PIN code. Confirm it when you enter the PIN code to
your computer.
*1
You can also start WPS-PBC by pressing and holding the (Wi-Fi | WPS) button.
Wi-Fi Direct Enable Enables the Wi-Fi Direct connection.
Disable* Disables the Wi-Fi Direct connection. When the network type
is Ad-hoc, Wi-Fi Direct is disabled.
Group Role Group Owner* Sets your printer as the group owner for Wi-Fi Direct.
Auto Automatically resolves the group role for Wi-Fi Direct.
Device Name Displays the device name that identifies the Wi-Fi Direct
network.