Filter
Top Products
Understanding the Printer Menus
137
Output Color
Purpose:
To specify the color mode to color or black and white.
Va lues:
Network
Use this menu to change the printer settings affecting jobs sent to the printer through the wired or wireless network.
NOTE:
Values marked by an asterisk (*) are the factory default menu settings.
Ethernet
Purpose:
To specify the communication speed and the duplex settings of Ethernet. The change takes effect after the printer is
turned off and then on.
Va lues:
NOTE:
This item is not displayed when the Ethernet cable is disconnected and
Wi-Fi
is set to
On
.
Wireless Status
Purpose:
To display the information on the wireless signal strength. No changes can be made on the operator panel to improve
the status of the wireless connection.
Va lues:
NOTE:
This item is displayed when the Ethernet cable is disconnected and
Wi-Fi
is set to
On
.
Color* Prints in the color mode. Works well with texts and photos.
Black & White Prints in the black and white mode. Works well with texts.
Auto* Detects the Ethernet settings automatically.
10BASE-T Half Uses 10base-T half-duplex.
10BASE-T Full Uses 10base-T full-duplex.
100BASE-TX Half Uses 100base-TX half-duplex.
100BASE-TX Full Uses 100base-TX full-duplex.
Connection Good Indicates good signal strength.
Acceptable Indicates marginal signal strength.
Low Indicates insufficient signal strength.
No Reception Indicates that no signal is received.
SSID Displays the name that identifies the wireless network.
Encryption Type Displays the encryption type.
No Security
WEP
WPA2*
1
-PSK-AES
Mixed Mode PSK
*1
WPA stands for Wi-Fi Protected Access
®
.