Filter
Top Products
30
Connecting Your Printer
NOTE:
Connect the Ethernet cable only when you need to setup a wired connection.
Wireless Connection
Following are the specifications for a wireless setup:
You can select a method to configure a wireless setting from the following:
NOTE:
Connecting to the network via Ethernet cable disables wireless setting.
Item Specification
Connectivity Wireless
Connectivity standard IEEE 802.11b/g/n compliant
Bandwidth 2.4 GHz
Data transfer rate IEEE 802.11b mode: 11, 5.5, 2, 1 Mbps
IEEE 802.11g mode: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
IEEE 802.11n mode: 65 Mbps
Security 64 (40-bit key)/128 (104-bit key) WEP, WPA-PSK (AES), WPA2-PSK (AES)(IEEE 802.1x
attestation function of WPA 1x non-corresponds), Mixed Mode PSK
Wi-Fi Protected Setup
®
(WPS)
*1
Push Button Configuration (PBC), Personal Identification Number (PIN)
*1
WPS 2.0 compliant. WPS 2.0 works on access points with the following encryption types: Mixed Mode PSK, WPA-PSK AES, WPA2-PSK
AES, Open (No Security)
WPS-PBC (Wi-Fi | WPS Button)
*1
WPS-PBC (Operator Panel Menu)
*1
WPS-PIN
*2
Auto SSID Setup
Manual SSID Setup
*1
WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) is a method to authenticate and register devices required for wireless
configuration, by starting WPS-PBC on the printer with the (Wi-Fi | WPS) button or operator panel menu, and then pressing the
button provided on the wireless LAN access point (Registrar) or router. This setting is available only when the access point supports
WPS-PBC.
*2
WPS-PIN (Wi-Fi Protected Setup-Personal Identification Number) is a method to authenticate and register devices required for wire-
less configuration, by entering PIN assignments in the printer and computer. This setting, performed through access point, is available
only when the access points of your wireless router supports WPS.