Filter
Top Products
102
Dell™ Printer Configuration Web Tool
SNMP
Purpose:
To configure the detailed settings of SNMP.
Va l ues :
SNMP v1/v2c
Purpose:
To edit the detailed settings of SNMP v1/v2 protocol.
To enter this page, click Edit SNMP v1/v2 Properties in the SNMP page.
Va l ues :
WSD Port Number Sets the port number. This must be 80 or between 8000 and 9999.
Receive Time-Out Sets the receive time-out period from 1 to 65535 seconds.
Notification Delivery Time-
Out
Sets the notification time-out period from 1 to 60 seconds.
Maximum Number of TTL Sets the maximum number of TTL from 1 to 10.
Maximum Number of
Notification
Sets the maximum number of notifications from 10 to 20.
SNMP Configuration Enable SNMP v1/v2c
Protocols
Select the check box to enable the SNMP v1/v2c protocol.
Edit SNMP v1/v2c
Properties
Click to display the SNMP v1/v2c page and to edit the setting of
SNMP v1/v2c protocol from the page.
Enable SNMP v3 Protocols Select the check box to enable the SNMP v3 protocol.
Edit SNMP v3 Properties Click to display the SNMP v3 page and to edit the setting of SNMP
v3 protocol from the page.
You can click this item only when SSL communication is enabled.
Community Name Community Name (Read
only)
Sets the community name to access (read only) data using up to 31
alphanumeric characters.
The original setting will remain valid if no input is made.
Characters entered for community name in the previous settings
will not be displayed on the screen. The default Read Community
is public.
Re-enter Community Name
(Read only)
Enters the community name to access (read only) data again to
confirm it.
Community Name
(Read/Write)
Sets the community name to access (read and write) data using up
to 31 alphanumeric characters.
The original setting will remain valid if no input is made.
Characters entered for community name in the previous settings
will not be displayed on the screen. The default Read/Write
Community is private.
Re-enter Community Name
(Read/Write)
Enters the community name to access (read and write) data again
to confirm it.