Dell E525w All in One Printer User Manual

Open as PDF

of 314

Connecting Your Printer

WPS-PBC (Wi-Fi | WPS Button)

You can start WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) by pressing the (Wi-Fi | WPS)

button.

NOTE:

WPS-PBC is available only when the wireless LAN access point (Registrar) or router supports WPS-PBC.

NOTE:

Before starting WPS-PBC with the

(Wi-Fi | WPS) button, confirm the position of the WPS button (button name may

vary) on the wireless LAN access point (Registrar) or router. For information about WPS operation on the wireless LAN access

point (Registrar) or router, refer to the manual supplied with the product.

NOTE:

For more information on the (Wi-Fi | WPS) button, see

"Status of Wi-Fi | WPS Button Backlight" on page 72.

If a problem occurs or error messages are displayed on the operator panel, see "Wireless Problems" on page 306.

Press and hold the

(Wi-Fi | WPS)

button on the operator panel until the LCD panel shows

Press WPS

Button on WPS Router

Start the WPS operation on the wireless LAN access point (Registrar) or router within 2 minutes.

When the wireless LAN connection setting is completed, the

(Wi-Fi | WPS)

button lights up.

WPS-PBC (Operator Panel Menu)

You can start WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) from the operator panel.

NOTE:

WPS-PBC is available only when the wireless LAN access point (Registrar) or router supports WPS-PBC.

NOTE:

Before starting WPS-PBC, confirm the position of the WPS button (button name may vary) on the wireless LAN access

point (Registrar) or router. For information about WPS operation on the wireless LAN access point (Registrar) or router, refer to

the manual supplied with the product.

NOTE:

A password is required to enter

Admin Menu

when

Panel Lock Set

is set to

Enable

. In this case, enter the

password you specified, and press the (Set) button.

Press the

(Menu)

button.

Press the button until

System