Filter
Top Products
44
Setting the IP Address
16
Enter the value of the subnet mask using the numeric keypad.
17
Press the button.
The next three digits are highlighted.
18
Repeat step 16 and step 17 to set subnet mask, and then press the
(Set)
button.
19
Press the
button and ensure that
Subnet Mask
is highlighted.
20
Press the button until
Gateway Address
is highlighted, and then press the
(Set)
button.
The cursor is located at the first three digits of the gateway address.
21
Enter the value of the gateway address using the numeric keypad.
22
Press the button.
The next three digits are highlighted.
23
Repeat step 21 and step 22 to set gateway address, and then press the
(Set)
button.
24
Turn off and turn on the printer.
Tool Box
NOTE:
When you use the IPv6 mode for network printing, the Tool Box cannot be used to assign an IP address.
1
Click
Start
All Programs
Dell Printers
Dell Printer Hub
.
Dell Printer Hub opens.
2
Select
Dell Color MFP E525w
print driver at
My Printers
.
3
Click on the link
Tool Box
from list at the left side of the page.
NOTE:
The Select Printer dialog box opens in this step, when multiple printer drivers are installed on your computer. In this
case, click the desired printer name listed in Printer Name.
The
Tool Box
opens.
4
Click the
System Settings
tab.
5
Select
Printer Information and Settings
from the list at the left side of the page.
6
Click
TCP/IP Settings
.
The
TCP/IP Settings
page is displayed.
7
Select
Panel
from
IP Address Mode
, and then enter the values in
IP Address
,
Subnet Mask
, and
Gateway Address
.
8
Click
Apply New Settings
.