Filter
Top Products
Understanding the Printer Menus
141
Protocol
Purpose:
To enable or disable each protocol. The change takes effect after the printer is turned off and then on.
Va lues:
IP Filter
Purpose:
To block data received from certain IP addresses through the wired or wireless network. You can set up to five IP
addresses. The change takes effect after the printer is turned off and then on.
IPv4 Wi-Fi
Direct*
1
IP Address Manually sets the IP address allocated to the printer.
Subnet Mask Manually sets the subnet mask.
Gateway Address Manually sets the gateway address.
IPSec*
2
Disable
Enable
*1
This item is available only when the Ethernet cable is disconnected and
Wi-Fi
is set to
On
.
*2
This item is available only when IP Sec is Enable on the Dell Printer Configuration Web Tool.
LPD Disable Disables the Line Printer Daemon (LPD) port.
Enable* Enables the LPD port.
Port9100 Disable Disables the Port9100 port.
Enable* Enables the Port9100 port.
IPP Disable Disables IPP port.
Enable* Enables IPP port.
WSD Disable Disables the Web Services on Devices (WSD) port.
Enable* Enables the Web Services on Devices (WSD) port.
SNMP Disable Disables the Simple Network Management Protocol (SNMP) UDP port.
Enable* Enables the SNMP UDP port.
E-mail Alert Disable Disables the E-mail Alert feature.
Enable* Enables the E-mail Alert feature.
EWS Disable Disables an access to Dell Printer Configuration Web Tool embedded in the printer.
Enable* Enables an access to Dell Printer Configuration Web Tool embedded in the printer.
Bonjour(mDNS) Disable Disables the Bonjour (mDNS).
Enable* Enables the Bonjour (mDNS).
HTTP-SSL/TLS Disable* Disables HTTP-SSL/TLS.
Enable Enables HTTP-SSL/TLS.
Google Cloud Print Disable* Disables Google Cloud Print.
Enable Enables Google Cloud Print.
SNTP Disable* Disables SNTP.
Enable Enables SNTP.