Filter
Top Products
86
Dell™ Printer Configuration Web Tool
USB Settings
Purpose:
To change USB settings on your printer.
Va l ues :
PCL Settings
Purpose:
To change the PCL settings.
Va l ues :
Panel Alert Tone Sets the volume of the tone that is emitted when the operator panel input is incorrect, or disables
the tone.
Job Tone Sets the volume of the tone that is emitted when a job is complete, or disables the tone.
Alert Tone Sets the volume of the tone that is emitted when a problem occurs, or disables the tone.
Out of Paper Tone Sets the volume of the tone that is emitted when the printer runs out of paper, or disables the
tone.
Auto Clear Alert Tone Sets the volume of the tone that is emitted 5 seconds before the printer performs auto clear, or
disables the tone.
All Tones Sets the volume of all the alert tones, or disables all the tones.
Job Time-Out Specifies the amount of time that the printer waits for data to arrive from the computer. The print
job is canceled if it times out.
Panel Language Used to set the language on the operator panel.
Disable printing with larger
paper size
*2
Specifies whether to print jobs if the paper set in the tray of the printer is larger than the paper
size set in the printer driver (the paper size does not have to match).
Auto Log Print Specifies if a job history needs to be printed after every 20 jobs.
mm/inch
*3
Specifies the measurement unit displayed after the numeric value on the operator panel.
*1 Enter 5 in Power Saver Timer - Sleep to put the printer in the power saver timer mode 5 minutes after it finishes a job. This uses less
energy, but requires more warm-up time for the printer. Enter 5 if your printer shares an electrical circuit with room lighting and you
notice lights flickering.
Select a high value if your printer is in constant use. In most circumstances, this keeps the printer ready to operate with minimum
warm-up time. Select a value between 5 and 30 minutes for the power saver timer mode if you want a balance between energy
consumption and a shorter warm-up period.
The printer automatically returns to the standby mode from the power saver timer mode when it receives data from the computer. You
can also return the printer to the standby mode by pressing any button on the operator panel.
*2 Available only in the Dell Printer Configuration Web Tool and the Tool Box.
*3 The default varies depending on country-specific factory default.
Port Status Enables the USB interface on your printer.
PS Data Format Sets PostScript 3 Compatible communication protocol for each interface.
Paper Size Sets the paper size.
Orientation Sets how text and graphics are oriented on the page.
Font Sets the font from the list of registered fonts.
Symbol Set Sets a symbol set for the specified font.
Font Size Sets the font size for scalable typographic fonts.
Font Pitch Sets the font pitch for scalable mono spaced fonts.
Form Line Sets the number of lines in a page.
Quantity Sets the number of copies to print.