Filter
Top Products
98
Dell™ Printer Configuration Web Tool
Va l ues :
Wireless LAN
Purpose:
To configure wireless network settings.
To connect the printer to a wireless network, be sure to disconnect the Ethernet cable.
NOTE:
Once wireless LAN is activated, wired LAN protocol will be disabled.
NOTE:
Values marked by an asterisk (*) are the factory default menu settings.
Ethernet
*1
Ethernet Settings Auto
*
Detects Ethernet transmission
rate and the duplex settings
automatically.
10Base-T Half-Duplex Selects 10Base-T Half-Duplex as
the default value.
10Base-T Full-Duplex Selects 10Base-T Full-Duplex as
the default value.
100Base-TX Half-Duplex Selects 100Base-TX Half-Duplex
as the default value.
100Base-TX Full-Duplex Selects 100Base-TX Full-Duplex
as the default value.
Current Ethernet Settings Displays the current settings of Ethernet.
MAC Address Displays the MAC address of the printer.
Port Status LPD Specifies whether to enable LPD.
Port9100 Specifies whether to enable Port9100.
IPP Sets whether to enable IPP.
E-mail Alert Specifies whether to enable the E-mail Alert feature.
Bonjour (mDNS) Specifies whether to enable the Bonjour (mDNS) feature.
SNMP Specifies whether to enable the SNMP.
EWS Specifies whether to enable the Dell Printer Configuration Web
Tool.
WSD Specifies whether to enable the Web Services on Devices (WSD)
port.
SNTP Sets whether to enable SNTP.
Google Cloud Print Sets whether to enable Google Cloud Print.
*1
This item is available only when the printer is connected with a wired network.