Filter
Top Products
Dell™ Printer Configuration Web Tool
95
Va lues:
Clean Developer
Purpose:
To rotate the developer motor and stir the toner in the toner cartridge, to use up a toner cartridge when you need to
replace it before the end of its life, or to stir the toner in a new toner cartridge.
Va l ues :
Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed.
The discharge phenomenon for charging the photo conductor varies with barometric pressure. Adjustments are
performed by specifying the altitude of the location where the printer is being used.
NOTE:
An incorrect altitude adjustment setting leads to poor printing quality, incorrect indication of remaining toner.
NOTE:
Values marked by an asterisk (*) are the factory default menu settings.
Va l ues :
Reset Defaults
Purpose:
To initialize NVM (non-volatile memory) memory for system parameters and Address Book data. After executing
this function and rebooting the printer, the menu parameters or data are reset to their default values.
Va l ues :
Auto Correct Click Start to perform color registration adjustment.
Color Registration
Adjustment 1 (Lateral)
Specifies lateral (perpendicular to paper feed direction) color adjustment values individually for Y
(Yellow), M (Magenta), C (Cyan) within the range of -5 to +5.
Color Registration
Adjustment 2 (Process)
Specifies process (paper feed direction) color adjustment values individually for LY (Left Yellow),
LM (Left Magenta), LC (Left Cyan), RY (Right Yellow), RM (Right Magenta), and RC (Right
Cyan) within the range of -5 to +5.
Clean Developer Click Start to stir the toner in the toner cartridge.
Yellow Toner Refresh Click Start to clean the toner in the yellow toner cartridge.
Magenta Toner Refresh Click Start to clean the toner in the magenta toner cartridge.
Cyan Toner Refresh Click Start to clean the toner in the cyan toner cartridge.
Black Toner Refresh Click Start to clean the toner in the black toner cartridge.
0 meter* Specifies the altitude of the location where the printer is installed.
1000 meters
2000 meters
3000 meters
Reset Defaults User Fax
Section and Restart Printer
Click Start to initialize the system parameters.
Reset Defaults User Scan
Section and Restart Printer
Click Start to initialize the fax number entries in the Address Book.
Reset Defaults System
Section and Restart Printer
Click Start to initialize the e-mail and server address entries in the Address Book.