Filter
Top Products
Ethernet Configuration Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 87
back-pressure
The back-pressure Interface Configuration (Ethernet, port-channel) mode command
enables back pressure on a given interface. To disable back pressure, use the
no form of
this command.
Syntax
back-pressure
no back-pressure
Default Configuration
Back pressure is enabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
In the following example back pressure is enabled on port 1.
port jumbo-frame
The port jumbo-frame Global Configuration mode command enables jumbo frames on
the device. To disable jumbo frames, use the
no form of this command.
Syntax
port jumbo-frame
no port jumbo-frame
Console(config)#
interface ethernet ext.
1
Console(config-if)# back-pressure