Filter
Top Products
Ethernet Configuration Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 101
Example
The following example configures a port storm-control broadcast rate 4000 on port 2.
show ports storm-control
The show ports storm-control Privileged EXEC mode command displays the storm
control configuration.
Syntax
show ports storm-control [interface]
Parameters
• interface — A valid Ethernet port. (Full syntax: unit/port)
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the storm control configuration.
(config)#
interface ethernet
ext.2
Console(config-if)#
port storm-control broadcast rate
4000
Console#
show ports storm-control
Port State Rate [Kbits/Sec] Included
---- ----- ---------------- --------
1 Disabled 3500 Broadcast
2 Disabled 3500 Broadcast