Intel SBCEGBESW1 Switch User Manual


 
Address Table Commands
26 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, all multicast packets on port 1 are forwarded.
bridge multicast forbidden forward-all
The bridge multicast forbidden forward-all Interface Configuration (VLAN) mode
command forbids a port to be a forward-all-multicast port. To restore the default
configuration, use the no form of this command.
Syntax
bridge multicast forbidden forward-all {add | remove} {ethernet interface-list | port-
channel port-channel-number-list}
no bridge multicast forbidden forward-all
Parameters
add — Forbids forwarding all multicast packets.
remove — Does not forbid forwarding all multicast packets.
interface-list — Separates nonconsecutive Ethernet ports with a comma and no
spaces; a hyphen is used to designate a range of ports.
port-channel-number-list — Separates nonconsecutive port-channels with a comma
and no spaces; a hyphen is used to designate a range of port-channels.
Default Configuration
This setting is disabled.
Command Mode
Interface Configuration (VLAN) mode
Console(config)#
interface vlan 2
Console(config-if)#
bridge multicast forward-all add
ethernet ext.1