Intel SBCEGBESW1 Switch User Manual


 
QoS Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 195
Example
The following example configures port 15 default CoS value to 3.
qos dscp-mutation
The qos dscp-mutation Global Configuration mode command applies the DSCP
Mutation map to a system DSCP trusted port. To return to the trust state with no DSCP
mutation, use the
no form of this command.
Syntax
qos dscp-mutation
no qos dscp-mutation
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode.
User Guidelines
The DSCP to DSCP mutation map is applied to a port at the boundary of a Quality of
Service (QoS) administrative domain.
If two QoS domains have different DSCP definitions, use the DSCP to DSCP mutation
map to match one set of DSCP values with the DSCP values of another domain.
Apply the DSCP to DSCP mutation map only to ingress and to DSCP-trusted ports.
Applying this map to a port causes IP packets to be rewritten with newly mapped DSCP
values at the ingress ports.
If the DSCP to DSCP mutation map is applied to an untrusted port, class of service (CoS)
or IP-precedence trusted port, this command has no immediate effect until the port
becomes DSCP-trusted.
Console(config)# interface ethernet ext. 15
Console(config-if) qos cos 3