Intel SBCEGBESW1 Switch User Manual


 
Web Server Commands
224 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
no ip http port
Parameters
port-number — Port number for use by the HTTP server. (Range: 0-65535)
Default Configuration
The default port number is 80.
Command Mode
Global Configuration mode
User Guidelines
Use the crypto certificate generate Global Configuration mode command to generate an
HTTPS certificate.
Specifying 0 as the port number effectively disables HTTP access to the device.
Example
The following example configures the http port number to 100.
ip http exec-timeout
The ip http exec-timeout command allows users to define the interval that the system
waits for user input in http sessions before automatic logoff. To return to default, use the
no form of this command.
Syntax
ip http exec-timout minutes [seconds]
no ip http exec-timout
Parameters
minutes — Specifies the number of minutes to wait.
seconds — Specifies the number of seconds to wait.
Console(config)# ip http port 100