Intel SBCEGBESW1 Switch User Manual


 
QoS Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 183
User Guidelines
An aggregate policer can be applied to multiple classes in the same policy map; An
aggregate policer cannot be applied across multiple policy maps or interfaces.
To return to the Policy-map Configuration mode, use the
exit command. To return to the
Privileged EXEC mode, use the
end command.
Example
The following example applies the aggregate policer called policer1 to a calass called
class1 in policy map called policy1.
wrr-queue cos-map
The wrr-queue cos-map Global Configuration mode command maps Class of Service
(CoS) values to a specific egress queue. To return to the default configuration, use the
no
form of this command.
Syntax
wrr-queue cos-map queue-id cos1...cos8
no wrr-queue cos-map
[queue-id]
Parameters
queue-id — Specifies the queue number to which the CoS values are mapped.
cos1...cos8 — Specifies CoS values to be mapped to a specific queue. (Range: 0-7)
Default Configuration
CoS values are mapped to 8 queues as follows:
Cos0 is mapped to queue 3.
Cos1 is mapped to queue 1.
Cos2 is mapped to queue 2.
Cos3 is mapped to queue 4.
Console(config)# policy-map policy1
Console(config-pmap)# class class1
Console(config-pmap-c)# police aggregate policer1