Filter
Top Products
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 237
21 SNMP Commands
snmp-server community
The snmp-server community Global Configuration mode command configures the
community access string to permit access to the SNMP protocol. To remove the specified
community string, use the
no form of this command.
Syntax
snmp-server community community [ro | rw | su] [ip-address] [view view-name]
snmp-server community-group community group-name [ip-address] [type {router |
oob}]
no snmp-server community community [ip-address]
Parameters
• community — Community string that acts like a password and permits access to the
SNMP protocol.
(Range: 1-20 characters)
• ro — Indicates read-only access (default).
• rw — Indicates read-write access.
• su — Indicates SNMP administrator access.
• ip-address — Specifies the IP address of the management station.
• group-name — Specifies the name of a previously defined group. A group defines the
objects available to the community. (Range: 1-30 characters)
• view-name — Specifies the name of a previously defined view. The view defines the
objects available to the community. (Range: 1-30 characters).
Default Configuration
No communities are defined.
Command Mode
Global Configuration mode