Intel SBCEGBESW1 Switch User Manual


 
QoS Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 173
Command Mode
Class-map Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example defines the match criterion for classifying traffic as an access
group called enterprise in a class map called class1..
policy-map
The policy-map Global Configuration mode command creates a policy map and enters
the Policy-map Configuration mode. To delete a policy map, use the
no form of this
command.
Syntax
policy-map policy-map-name
no policy-map policy-map-name
Parameters
policy-map-name — Specifies the name of the policy map.
Default Configuration
If the packet is an IP packet, the DCSP value of the policy map is 0.
If the packet is tagged, the CoS value is 0.
Command Mode
Global Configuration mode
Console (config)#
class-map
class1
Console (config-cmap)#
match access-group
enterprise