Intel SBCEGBESW1 Switch User Manual


 
Ethernet Configuration Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 99
Parameters
unknown-unicast Specifies also counting unknown unicast packets.
Default Configuration
Multicast packets are not counted.
Command Modes
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables counting broadcast and multicast packets on Ethernet port
2.
port storm-control broadcast enable
The port storm-control broadcast enable Interface Configuration (Ethernet) mode
command enables broadcast storm control. To disable broadcast storm control, use the
no
form of this command.
Syntax
port storm-control broadcast enable
no port storm-control broadcast enable
Default Configuration
Broadcast storm control is disabled.
Command Modes
Interface Configuration (Ethernet) mode
Console(config)#
interface ethernet
ext.2
Console(config-if)#
port storm-control include-multicast unknown-unicast