Filter
Top Products
QoS Commands
188 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
• buffers – Displays the buffer setting for the interface’s queues. Displays the queue
depth for each queue and the thresholds for the WRED.
• queuing — Displays the queue strategy (WRR or EF), the weight for WRR queues,
the CoS to queue map and the EF priority.
• policers — Displays the shaper of the specified interface and the shaper for the queue
on the specified interface.
• shapers — Displays all the policers configured for this interface, their setting and the
number of policers currently unused.
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC mode
User Guidelines
If no keyword is specified, port QoS QoS mode (e.g., DSCP trusted, CoS trusted,
untrusted), default CoS value, DSCP-to-DSCP-mutation map attached to the port, and
policy map attached to the interface are displayed.
If no interface is specified, QoS information about all interfaces is displayed.
Example
The following example displays the buffer settings for queues on Ethernet port 1.
Console# show qos interface ethernet 1 buffers
Ethernet 1
Notify Q depth
qid Size
1 125
2 125
3 125
4 125
5 125
6 125
7 125
8 125