Intel SBCEGBESW1 Switch User Manual


 
RMON Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 201
rmon collection history
The rmon collection history Interface Configuration (Ethernet, port-channel) mode
command enables a Remote Monitoring (RMON) MIB history statistics group on an
interface. To remove a specified RMON history statistics group, use the
no form of this
command.
Syntax
rmon collection history index [owner ownername] [buckets bucket-number] [interval
seconds]
no rmon collection history index
Parameters
index — Specifies the statistics group index . (Range: 1-65535)
ownername — Specifies the RMON statistics group owner name. (Range: 0-160
characters)
bucket-number — Number of buckets specified for the RMON collection history
group of statistics. If unspecified, defaults to 50. (Range:1-65535)
seconds — Number of seconds in each polling cycle. (Range: 1-3600)
Default Configuration
RMON statistics group owner name is an empty string.
Number of buckets specified for the RMON collection history statistics group is 50.
Number of seconds in each polling cycle is 1800.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
512 to 1023 Octets The total number of packets (including bad packets) received that are between
512 and 1023 octets in length inclusive (excluding framing bits but including
FCS octets).
1024 to 1518 Octets The total number of packets (including bad packets) received that are between
1024 and 1518 octets in length inclusive (excluding framing bits but including
FCS octets).
Field Description