Filter
Top Products
SNMP Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 249
no snmp-server trap authentication
Default Configuration
SNMP failed authentication traps are enabled.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables SNMP failed authentication traps.
snmp-server contact
The snmp-server contact Global Configuration mode command configures the system
contact (sysContact) string. To remove system contact information, use the
no form of the
command.
Syntax
snmp-server contact text
no snmp-server contact
Parameters
• text — Specifies the string that describes system contact information. (Range: 1-160
characters)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
Console(config)# snmp-server trap authentication