Filter
Top Products
LACP Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 135
11 LACP Commands
lacp system-priority
The lacp system-priority Global Configuration mode command configures the system
priority. To return to the default configuration, use the
no form of this command.
Syntax
lacp system-priority value
no lacp system-priority
Parameters
• value — Specifies system priority value. (Range: 1-65535)
Default Configuration
The default system priority is 1.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the system priority to 120.
lacp port-priority
The lacp port-priority Interface Configuration (Ethernet) mode command configures
physical port priority. To return to the default configuration, use the
no form of this
command.
Console(config)# lacp system-priority 120