Filter
Top Products
QoS Commands
190 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
qos wrr-queue threshold tengigabitethernet queue-id threshold-percentage0 threshold-
percentage1,
threshold-percentage2
no qos wrr-queue threshold tengigabitethernet queue-id
Parameters
• gigabitethernet — Indicates that the thresholds are to be applied to Gigabit Ethernet
ports.
• tengigabitethernet — Indicates that the thresholds are to be applied to 10 Gigabit
Ethernet ports.
• queue-id — Specifies the queue number to which the threshold is assigned.
• threshold-percentage0,1,2 — Specifies the queue threshold percentage value. Each
value is separated by a space. (Range: 0-100)
Default Configuration
80 percent for all thresholds.
Command Mode
Global Configuration mode.
User Guidelines
The packet refers to a certain threshold by the conformance level. If threshold 0 is
exceeded, packets with the corresponding DP are dropped until the threshold is no longer
exceeded. However, packets assigned to threshold 1 or 2 continue to be queued and sent as
long as the second or third threshold is not exceeded.
Example
The following example assigns a threshold of 80 percent to WRR queue 1.
qos map policed-dscp
The qos map policed-dscp Global Configuration mode command modifies the policed-
DSCP map for remarking purposes. To return to the default map, use the
no form of this
command.
Console (config)# qos wrr-queue threshold gigabitethernet 1 80