Filter
Top Products
Ethernet Configuration Commands
82 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example adds a description to Ethernet port 5.
speed
The speed Interface Configuration (Ethernet, port-channel) mode command configures
the speed of a given Ethernet interface when not using auto-negotiation. To restore the
default configuration, use the
no form of this command.
Syntax
speed {10 | 100 | 1000| 10000}
no speed
Parameters
• 10 — Forces10 Mbps operation.
• 100 — Forces 100 Mbps operation.
• 1000 — Forces 1000 Mbps operation.
• 10000 — Forces 10000 Mbps operation.
Default Configuration
Maximum port capability
Command Mode
Interface Configuration (Ethernet, port-channel) mode
Console(config)#
interface ethernet
ext.5
Console(config-if)#
description
"RD SW#3"