Intel SBCEGBESW1 Switch User Manual


 
Spanning-Tree Commands
272 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
Default Configuration
The default number of hops is 20.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the maximum number of hops that a packet travels in
an MST region before it is discarded to 10.
spanning-tree mst port-priority
The spanning-tree mst port-priority Interface Configuration mode command configures
port priority for the specified MST instance. To restore the default configuration, use the
no form of this command.
Syntax
spanning-tree mst instance-id port-priority priority
no spanning-tree mst instance-id port-priority
Parameters
instance-ID—ID of the spanning tree instance. (Range: 1-15)
priority—The port priority. (Range: 0-240 in multiples of 16)
Default Configuration
The default port priority for IEEE Multiple Spanning Tree Protocol (MSTP) is 128.
Command Modes
Interface Configuration (Ethernet, port-channel) mode
Console (config) #
spanning-tree mst max-hops
10