Intel SBCEGBESW1 Switch User Manual


 
AAA Commands
10 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
User Guidelines
The default and optional list names created with the aaa authentication login command
are used with the
login authentication command.
Create a list by entering the
aaa authentication login list-name method command for a
particular protocol, where list-name is any character string used to name this list. The
method argument identifies the list of methods that the authentication algorithm tries, in
the given sequence.
The additional methods of authentication are used only if the previous method returns an
error, not if it fails. To ensure that the authentication succeeds even if all methods return
an error, specify none as the final method in the command line.
Example
The following example configures the authentication login.
aaa authentication enable
The aaa authentication enable Global Configuration mode command defines
authentication method lists for accessing higher privilege levels. To restore defaults, use
the no form of this command.
Syntax
aaa authentication enable {default | list-name} method1 [method2...]
no aaa authentication enable {default | list-name}
Parameters
default — Uses the listed authentication methods that follow this argument as the
default list of methods, when using higher privilege levels.
list-name — Character string used to name the list of authentication methods
activated, when using access higher privilege levels. (Range: 1-12 characters)
method1 [method2...] — Specify at least one method from the following list:
Console(config)# aaa authentication login default radius tacacs enable
line local none
Keyword Description
enable Uses the enable password for authentication.