Intel SBCEGBESW1 Switch User Manual


 
VLAN Commands
378 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
no switchport general map subnets-group group
Parameters
group - Group number. Range: 1 - 2147483647
vlan-id - Define the VLAN ID that is associated with the rule.
Default Configuration
This command has no default configuration.
Command Mode
Interface configuration (Ethernet, port-channel)
User Guidelines
The priority between VLAN classification rules is:
1. MAC based VLAN (Best match between the rules)
2. Subnet based VLAN (Best match between the rules)
3. Protocol based VLAN
4. PVID
Example
The following example sets the subnets-based classification rule.
show vlan protocols-groups
The show vlan protocols-groups Privileged EXEC command displays protocols-groups informa-
tion.
Syntax
show vlan protocols-groups
Default Configuration
This command has no default configuration.
Console (config-if)# switchport general map subnets-group 1 vlan 8