Filter
Top Products
AAA Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 13
Parameters
• default — Uses the default list created with the aaa authentication enable command.
• list-name — Uses the indicated list created with the aaa authentication enable
command.
Default Configuration
Uses the default set with the aaa authentication enable command.
Command Mode
Line Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example specifies the default authentication method when accessing a
higher privilege level from a Telnet.
ip http authentication
The ip http authentication Global Configuration mode command specifies
authentication methods for HTTP server users. To restore the default configuration, use
the no form of this command.
Syntax
ip http authentication method1 [method2...]
no ip http authentication
Console(config)# line console
Console(config-line)# enable authentication default