Intel SBCEGBESW1 Switch User Manual


 
Web Server Commands
226 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
ip https port
The ip https port Global Configuration mode command specifies the TCP port used by
the server to configure the device through the Web browser. To return to the default
configuration, use the
no form of this command.
Syntax
ip https port port-number
no ip https port
Parameters
port-number — Port number to be used by the HTTP server. (Range: 0-65535)
Default Configuration
The default port number is 443.
Command Mode
Global Configuration mode
User Guidelines
Specifying 0 as the port number effectively disables HTTP access to the device.
Example
The following example configures the https port number to 100.
ip https exec-timeout
The ip https exec-timeout command allows users to define the interval that the system
waits for user input in https sessions before automatic logoff. To return to default, use the
no form of this command.
Syntax
ip https exec-timout minutes [seconds]
Console(config)# ip https port 100