Intel SBCEGBESW1 Switch User Manual


 
AAA Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 17
Parameters
password — Password for this level. (Range: 1-159 characters)
encrypted — Encrypted password to be entered, copied from another device
configuration.
Default Configuration
No password is defined.
Command Mode
Line Configuration mode
User Guidelines
If a password is defined as encrypted, the required password length is 32 characters.
Example
The following example specifies the password called `secret' on a Telnet.
enable password
The enable password Global Configuration mode command sets a local password to
control access to user and privilege levels. To remove the password requirement, use the
no form of this command.
Syntax
enable password [level level] password [encrypted]
no enable password [level level]
Parameters
password — Password for this level. (Range: 1-159 characters)
level — Level for which the password applies. If not specified the level is 15 (Range:
1-15).
encrypted — Encrypted password entered, copied from another device configuration.
Console(config)# line console
Console(config-line)# password secret