Intel SBCEGBESW1 Switch User Manual


 
Clock Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 57
Start: First Sunday in April
End: Last Sunday in October
Time: 2 am local time
EU rule for daylight savings time:
Start: Last Sunday in March
End: Last Sunday in October
Time: 1.00 am (01:00)
Example
The following example sets summer time starting on the first Sunday in April at 2 am and
finishing on the last Sunday in October at 2 am.
sntp authentication-key
The sntp authentication-key Global Configuration mode command defines an
authentication key for Simple Network Time Protocol (SNTP). To remove the
authentication key for SNTP, use the
no form of this command.
Syntax
sntp authentication-key number md5 value
no sntp authentication-key number
Parameters
number — Key number (Range: 1-4294967295)
value — Key value (Range: 1-8 characters)
Default Configuration
No authentication key is defined.
Command Mode
Global Configuration mode
Console(config)# clock summer-time recurring first sun apr 2:00 last sun oct
2:00