Intel SBCEGBESW1 Switch User Manual


 
Clock Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 55
no clock timezone
Parameters
hours-offset — Hours difference from UTC. (Range: 12 hours to +13 hours)
minutes-offset — Minutes difference from UTC. (Range: 0-59)
acronym — The acronym of the time zone. (Range: Up to 4 characters)
Default Configuration
Clock set to UTC.
Command Mode
Global Configuration mode
User Guidelines
The system internally keeps time in UTC, so this command is used only for display
purposes and when the time is manually set.
Example
The following example sets the timezone to 6 hours difference from UTC.
clock summer-time
The clock summer-time Global Configuration mode command configures the system to
automatically switch to summer time (daylight saving time). To configure the software not
to automatically switch to summer time, use the
no form of this command.
Syntax
clock summer-time recurring {usa | eu | {week day month hh:mm week day month
hh:mm
}} [offset offset] [zone acronym]
clock summer-time date date month year hh:mm date month year hh:mm [offset offset]
[
zone acronym]
clock summer-time date month date year hh:mm month date year hh:mm [offset offset]
[
zone acronym]
Console(config)# clock timezone -6 zone CST