Filter
Top Products
802.1x Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 401
No traps are sent.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
The command is relevant when multiple hosts is disabled and the user has been
successfully authenticated.
Example
The following example forwards frames with source addresses that are not the supplicant
address and sends consecutive traps at intervals of 100 seconds.
dot1x guest-vlan
The dot1x guest-vlan Interface Configuration mode command defines a guest VLAN. To
return to the default configuration, use the
no form of this command.
Syntax
dot1x guest-vlan
no dot1x guest-vlan
Default Configuration
No VLAN is defined as a guest VLAN.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
Use the dot1x guest-vlan enable Interface Configuration mode command to enable
unauthorized users on an interface to access the guest VLAN.
Console(config-if)# dot1x single-host-violation forward trap 100