Filter
Top Products
Management ACL Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 145
13 Management ACL Commands
management access-list
The management access-list Global Configuration mode command configures a
management access list and enters the Management Access-list Configuration command
mode. To delete an access list, use the
no form of this command.
Syntax
management access-list name
no management access-list
name
Parameters
• name — Access list name. (Range: 1-32 characters)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Use this command to configure a management access list. The command enters the
Access-list Configuration mode, where permit and deny access rules are defined using the
permit (Management) and deny (Management) commands.
If no match criteria are defined, the default is deny.
If you reenter an access list context, the new rules are entered at the end of the access list.
Use the
management access-class command to select the active access list.
The active management list cannot be updated or removed.
Management ACL requires a valid management interface, which is a port, VLAN, or port-
channnel with an IP address or console interface. Management ACL only restricts access
to the device for management configuration or viewing.