Intel SBCEGBESW1 Switch User Manual


 
Address Table Commands
32 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
Command Mode
Privileged EXEC mode
User Guidelines
Internal usage VLANs (VLANs that are automatically allocated on ports with a defined
Layer 3 interface) are presented in the VLAN column by a port number and not by a
VLAN ID.
"Special" MAC addresses that were not statically defined or dynamically learned are
displayed in the MAC address table. This includes, for example, MAC addresses defined
in ACLS.
Example
In this example, all classes of entries in the bridge-forwarding database are displayed.
show bridge address-table static
The show bridge address-table static Privileged EXEC mode command displays statically
created entries in the bridge-forwarding database.
Syntax
show bridge address-table static [vlan vlan] [ethernet interface | port-channel port-
channel-number]
Parameters
vlan — Specifies a valid VLAN, such as VLAN 1.
interface — A valid Ethernet port.
Console#
show bridge address-table
Aging time is 300 sec
interface mac address Port Type
--------- -------------- ---- -------
1 00:60:70:4C:73:FF 5 dynamic
1 00:60:70:8C:73:FF 5 dynamic
200 00:10:0D:48:37:FF 5 static