Filter
Top Products
IGMP Snooping Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 113
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
Multicast device ports can be configured statically using the bridge multicast forward-
all
Interface Configuration (VLAN) mode command.
Example
The following example enables automatic learning of multicast device ports on VLAN 2.
ip igmp snooping host-time-out
The ip igmp snooping host-time-out Interface Configuration (VLAN) mode command
configures the host-time-out. If an IGMP report for a multicast group was not received for
a host-time-out period from a specific port, this port is deleted from the member list of
that multicast group. To restore the default configuration, use the
no form of this
command.
Syntax
ip igmp snooping host-time-out time-out
no ip igmp snooping host-time-out
Parameters
• time-out — Specifies the host timeout in seconds. (Range: 1-2147483647)
Default Configuration
The default host-time-out is 260 seconds.
Command Mode
Interface Configuration (VLAN) mode
Console(config) #
interface vlan
2
Console(config-if)#
ip igmp snooping mrouter learn-pim-dvmrp