Filter
Top Products
RADIUS Commands
218 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the number of times the software searches all RADIUS
server hosts to 5 times.
radius-server source-ip
The radius-server source-ip Global Configuration mode command specifies the source
IP address used for communication with RADIUS servers. To restore the default
configuration, use the
no form of this command.
Syntax
radius-server source-ip source
no radius-source-ip source
Parameters
• source — Specifies a valid source IP address.
Default Configuration
The source IP address is the IP address of the outgoing IP interface.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
console(config)# radius-server retransmit 5